Description
- Hign-concerned Chemical: None
- Voltage: 220V
- Power: 200w/m2
- Model Number: cable9-400w
- Type: Floor Heating Parts
- Material: Anti-flammable PC
- Brand Name: MAXKOSKO
- Certification: CE
- Type: Floor Heating Systems
- Power: 400W/m2±10%
- Rated: 220V
- Material: High temperature resistant PVC
Rated power: 400W/m2 ±10%
Max surface temperature: 52° C
Melting Point Film: 130 ° C
Thichness: 0.338mm
Width: 50cm
Infrared radiation: 90,4%
Wave Length: 5-20 um
Maximum film length for one row: 1300W
Electromagnetic field-almost none
400W high-power electric heating film, suitable for high-temperature products such as carbon crystal heating pad heating element materials, high-temperature yoga studios, and steam rooms.
Superiority of Heating Film Heating System:
Infrared heating is one of the healthiest and most modern method of heating, which uses a similar thermal properties as the sun itself. Infra red rays directly heat people, walls and objects, and then the air is heated from them. In traditional radiator heating it leads to heating and drying the air. Warm air flows up and first heats the top of the room and then low-lying objects, people and so on.
When using infra red heating, the air temperature is usually lower by 3-4 ° C, as in a room with traditional heating it to achieve a comparable feeling of warmth. Lowering the air temperature by 1 ° C can save up to 5-6% of energy.
Suitable for high temperature products such as carbon crystal heating pad heating element materials, high temperature yoga studios, sweat steam rooms, etc.
– Infra heating does not cause dust dispersion
– It creates a healthy environment, destroys bacteria
– Ensures uniform temperature in whole room
– Clean, noiseless, maintenance-free operation and space-saving
– Easy control and operation with thermostats
– Easy installation.
The maximum carrying power of the heating film is 1300W, but we can solve it in parallel.
For example,
If you buy 220W heating film, the length of a single heating film needs to be <10m,
If you buy a 280W heating film, the length of the single heating film needs to be <9m,
If you buy a 400W heating film, the length of the single heating film needs to be <6m.
2.When installing, do not overlap each film. Always keep 1~3cm distance between films. and keeps 10~20cm distance between the way and films.
2. Clip the electric heating film clip to the copper strip part.
3. Use pressure pliers to compress the wiring.
4. Seal the wiring part with waterproof glue.
5. Seal the other side with cement.
6. Seal the other ends of the electric heating film with sealing glue.
2. Tile paving steps: extruded board ➔ reflective film ➔ connected to the electric heating film and put in a waterproof sealed bag ➔ waterproof layer ➔ wipe cement and tile.
Reviews
There are no reviews yet.