Description
- Model Number: Tuya Smoke Detector
- Smart home platform: Tuya
- Certification: CE,RoHS
- Type: Smoke Detector
- Type: Tuya Smoke Detector
- Type A: Smoke Detector WiFi
- Type B: Smoke Detector Zigbee
- Type C: Tuya WiFi Fire Alarm Sensor
- Type D: Tuya Zigbee Fire Alarm Sensor
- Type E: Tuya Smoke Alarm Sensor
- Type F: Tuya Smoke Alarm
- Type G: Smoke Alarm Sensor WiFi
- Type H: Tuya Smoke Alarm WiFi
- Type I: Smoke Alarm WiFi
- Type J: Smoke Alarm Zigbee
- Type K: WiFi Smart Fire Protection
- Type L: Zigbee Smart Fire Protection
-360° comprehensive highsensitivity monitoring
-This Smoke detector designed with LOW voltage & faultprompt function and will warning when low power, with Self-test function.
-You will be alerted immediately in the event of a fire,to help you escape from Fire Hazard in time.
Static current:<10uA
Alarm Current:<100mA
Low battery alert:≤6.5±0.5V
Alarm Sound Level:>80db/2m(2.4GHz)
WIFI: 2.4G 802.11b/g/n
Working Temperature:-10-50℃
Working Humidity:95%RH ≤95%RH
Tuya/Smart Life APP control
Testing: in normal status, long press ‘TEST’ button for 2s to trigger the sound & light alarm, alarm message is pushed to the mobile APP.
Note:Make sure your smartphone is connected to the 2.4G WiFi (5G not support)
a) Launch the APP, click ‘Add device’—‘Security Sensor’—‘Sensor (WiFi)’ / “Smoke(WiFi)”.
b) Long press the ‘TEST’ button for 5s until LED flashes with a short beep of ‘Di’ (long press the button within 20s of loading the battery to enter WiFi configuration mode).
c) Click ‘OK’ in the APP—input password for the WiFi an click ‘OK’, the detector enters configuration mode which lasts for 60s maximum.
A long beep of ‘Di’ with LED indicator on for 10s means the WiFi configuration is completed. When WiFi configuration fails, the detector exits configuration mode with short beep of ‘Di Di Di’.
WiFi configuration is done based on the 3 steps above.
WiFi Networking Status: when LED indicator is on for 10s after battery is loaded, it means the detector is successfully connected to WiFi.
b. Install the expansion tube on the ceiling
c. Fix the installation board by using the screw
d. Aiming the alarming device with the installing board and connect them, rotating clockwise till heard the “kaca” sound, means installing correctl
Reviews
There are no reviews yet.